Hand Block Printing Cushion Cover

- Carving the Block: First of all, wood block is oiled and sanded. A master block maker traces the chosen motif or a design onto a wooden block, usually made of teak. Normally, motifs design take from the animals, flowers, leaves…etc

- Prepare the Dye: The basic fabric may be white or color. Desired color mixed together with another color to match the required color shade.

- Preparing the fabric: The fabric is laid flat on a table, and fixed firmly to the table with pins. A special wooden table is used for block printing. Normally, a size of table is 6 meter in length and 50 inches in wide and a blanket layer and a thick cotton sheet on the top that is tightly tucked in from all sides of the table. All of these layers help the block print to properly absorb and print onto the fabric.

- Printing: Once the colors are mixed, the master block printer pours the dyes onto a rolling dye tray. The tray has several layers of gauze cloth. The block is then dipped in dye and stamped firmly by hand onto the fabric. This requires a certain amount of force with the aid a hammer. If the design incorporates with multiple colors, then each is applied separately with its own block, after the previous color has dried.

- Washing: Once the color has dried, the completed block printed fabric is sent for washing. The fabric is washed by hand using a sustainable water source and spread in the large & wide land under the sun for drying.
  Please note that wooden hand block printing is absolutely time consuming job and done by only & only hand so irregularities may come out of the finally in the product.

$12.65

5 in stock

Category: Cushion Covers

Description

ART	HAND BLOCK PRINTING
NET WEIGHT	0.150 Kgs.
MATERIAL	Cotton
CARE	Cool iron if needed, do not rub the textures, Dry clean only, Keep away from the direct sunlight.
NOTE	Hand Block Printing is manufactured by totally handmade process. Therefore, some irregularities in color, design & size may come out, which will give it natural beauty.